Zehnder ComfoSpot 50 Filters 182×123×20 mm – Original G4 + G4 / F7 + G4 Sets

Original Zehnder ComfoSpot 50 Filter Sets

Zehnder ComfoSpot 50 filters with dimensions 182×123×20 mm, designed for supply and exhaust air filtration in the Zehnder ComfoSpot 50 ventilation unit.

Two original Zehnder filter combinations are available: a G4 + G4 System Protection Filter Set and an F7 + G4 Hygiene Filter Set. Both options help protect the ventilation unit, while the F7 version provides finer filtration of incoming outdoor air.

You can also view our full range of recuperator filters.

Available Filter Set Options

G4 + G4 System Protection Filter Set – 527005390

The G4 + G4 set contains two coarse filters designed primarily to protect the ventilation unit and heat exchanger from larger airborne contaminants.

• 2 × G4 / ISO Coarse 60% filters
• Filter dimensions: 182×123×20 mm
• Original Zehnder code: 527005390
• Suitable for standard system protection
• Captures dust, fibres, insects and other coarse particles

F7 + G4 Hygiene Filter Set – 527005400

The F7 + G4 set combines finer filtration of incoming outdoor air with protection of the exhaust air side of the ventilation unit.

• 1 × F7 / ePM1 50% supply air filter
• 1 × G4 / ISO Coarse 60% exhaust air filter
• Filter dimensions: 182×123×20 mm
• Original Zehnder code: 527005400
• Suitable for areas with pollen, fine dust or increased outdoor air pollution

G4 + G4 or F7 + G4 – Which Set Should You Choose?

The G4 + G4 set is the standard choice when the main priority is protecting the ventilation unit from larger particles and dust.

The F7 + G4 set is the better choice when finer filtration of supply air is required. The F7 filter captures smaller airborne particles than a G4 filter and is particularly useful during pollen season or in areas with increased traffic and outdoor air pollution.

What Is the Difference Between G4 and F7 Filters?

G4 / ISO Coarse 60% Filter

The G4 filter is designed to capture larger airborne particles such as dust, fibres, insects, coarse pollen and other debris. It helps protect the heat exchanger and internal components of the ventilation unit from contamination.

F7 / ePM1 50% Filter

The F7 filter provides finer filtration of incoming outdoor air. It helps reduce fine dust, pollen, soot and other smaller airborne particles entering the building through the ventilation system.

It is particularly useful for homes located in urban areas, near busy roads or in locations with elevated pollen levels.

Compatible Model

• Zehnder ComfoSpot 50

Before ordering, check the dimensions and original filter reference of your existing filters to confirm compatibility.

Original Zehnder Filter Codes

• 527005390 – G4 + G4 System Protection Filter Set
• 527005400 – F7 + G4 Hygiene Filter Set

Technical Specifications

• Brand: Zehnder
• Model: ComfoSpot 50
• Filter dimensions: 182×123×20 mm
• Available filter sets: G4 + G4 or F7 + G4
• Original codes: 527005390 / 527005400
• EN 779 classification: G4 / F7
• ISO 16890 classification: ISO Coarse 60% / ePM1 50%
• Number of filters per set: 2
• Filter construction: pleated / Z-Pleat
• Original Zehnder product
• Made in the EU

Filter Standards

• ISO 16890
• EN 779:2012

Z-Pleat Filter Construction

The filters use a pleated construction designed to provide a large filtration surface within the compact dimensions required by the ComfoSpot 50. The folded filter media increases the available surface area for particle collection while maintaining efficient airflow through the ventilation unit.

• Large filtration surface
• Efficient use of filter media
• Effective particle collection
• Compact pleated construction
• Designed for stable airflow

When Should Zehnder ComfoSpot 50 Filters Be Changed?

Ventilation filters should be inspected regularly and replaced when visibly contaminated or when the ventilation unit indicates that filter replacement is required.

A typical replacement interval is approximately 3–6 months, depending on operating and environmental conditions such as:

• Outdoor air pollution
• Pollen levels
• Nearby construction work
• Traffic pollution
• Indoor dust levels
• Pets
• Ventilation system operating time

Regular replacement of heat recovery unit filters helps maintain proper airflow and protects the ventilation system from excessive dust accumulation.

Why Choose Original Zehnder ComfoSpot 50 Filters?

Original Zehnder filters are manufactured for the specified dimensions and filtration requirements of the ComfoSpot 50 ventilation unit. A correct fit helps minimise air bypass around the filter and ensures that air passes through the intended filter media.

Choosing between G4 + G4 and F7 + G4 allows you to select either standard system protection or finer supply-air filtration depending on your requirements.

FAQ – Zehnder ComfoSpot 50 Filters

Do these filters fit Zehnder ComfoSpot 50?

Yes. These original Zehnder filter sets are designed for the Zehnder ComfoSpot 50 ventilation unit.

What are the filter dimensions?

Each filter measures 182×123×20 mm.

Are these original Zehnder filters?

Yes. These are original Zehnder filter sets with reference numbers 527005390 and 527005400.

What is the difference between 527005390 and 527005400?

527005390 is the G4 + G4 System Protection Filter Set. 527005400 is the F7 + G4 Hygiene Filter Set, which provides finer filtration of incoming outdoor air.

Which set should I choose – G4 + G4 or F7 + G4?

Choose G4 + G4 for standard ventilation-unit protection. Choose F7 + G4 when you want finer filtration of incoming outdoor air, particularly in areas with pollen, fine dust or higher outdoor air pollution.

How often should ComfoSpot 50 filters be replaced?

A typical replacement interval is approximately every 3–6 months, depending on air quality, system usage and environmental conditions.

Bulk Orders

Discounts are available for larger orders of 10 filter sets or more. Contact us for an individual quotation for commercial or larger-volume orders.