Zehnder ComfoD 150/160 filters (237×150×24) – original set G4 + F7

Description

Zehnder ComfoD 150/160 filters are original, high-quality recuperator filters designed for effective filtration of supply and exhaust air. These filters help ensure clean indoor air and protect the ventilation unit from contamination.

These original Zehnder filters are designed and manufactured specifically for Zehnder ComfoD 150/160 ventilation units.

Set contents – G4 + F7

The set includes two filters of different classes to protect both the device and the indoor air.

• 1 × F7 (ePM1 50%) filter for supply air
• 1 × G4 (Coarse 60%) filter for exhaust air

Differences between G4 and F7 filters

G4 filter (exhaust air)

The G4 filter retains at least 60% of large particles larger than 10 microns - soil particles, large pollen, plant debris, insect wings, sawdust, sand and textile fibers. It protects the recuperator from dust accumulation, thus maintaining quiet operation, lower energy consumption and a longer system life.

F7 filter (supply air)

The F7 filter captures at least 50% of fine particles, 0.3-1.0 microns in size – bacteria, smog, tobacco smoke, combustion dust, spores and pollen. It purifies the outdoor air entering the premises, making it especially useful for allergy sufferers or those living in areas with heavy traffic or urban pollution.

Compatible models

• Zehnder ComfoD 150
• Zehnder ComfoD 160
• Zehnder ComfoAir 160
• Wernig ComfoVent G90-160

Technical specification

• Model: Zehnder ComfoD 150/160
• Original kit code: 400100024
• Dimensions: 237×150×24 mm
• Filter class (EN779): G4 + F7
• Filter class (ISO16890): Coarse 60% + ePM1 50%
• Included: 2 filters
• Original Zehnder product
• Made in the EU
• Filter type: pleated

Compliance and standards

• ISO 16890 standard
• EN 779:2012 standard

Pleated filter construction

The filters are manufactured using a pleated construction that increases the filtration surface area – the filter retains more particles and lasts longer, while air resistance in the system remains low.

• Larger filtration surface area
• Better particle collection
• Longer service life

When to change filters?

Zehnder recommends changing the heat exchanger filters every 3-6 months. The frequency of replacement depends on the level of air pollution, allergies, pets or smoking in the room, and dust from nearby construction sites. If the unit has a filter replacement indicator, follow its warnings - otherwise, visually inspect the filters.

FAQ

Are these filters suitable for Zehnder ComfoD 150/160?

Yes, these are original Zehnder filters, manufactured specifically for the ComfoD 150/160 units. They are also suitable for the ComfoAir 160 and Wernig ComfoVent G90-160 models.

Are these original filters?

Yes, these are original Zehnder filters, which ensures full compatibility and performance as specified by the manufacturer. With original filters, the device uses less energy than with non-original ones.

How often should filters be changed?

It is recommended to change every 3-6 months, depending on environmental conditions.